The Appropriate Industrial Ceiling Fans For Your Café Kitchen

November 14, 2009 by: mr.know it all

Industrial extractor fans go in a huge variety of shapes, sizes, and strengths so it may be difficult to select the best one for your restaurant kitchen.

There are approximately seven various sizes that are available from 315mm to 630mm which can be mounted in a few different ways. A lot of businesses prefer the axial style of fan as it can be used for a spacious range of applications. This article will discuss these machines and hopefully make your selection of fan a bit easier.

One of the common disadvantages of industrial extractor fans is how loud they are. This can be such a trouble that most restaurant managers choose to run them just when the amount of steam, smoke, and pollutants in the air comes to an unbearable level. Nevertheless, there are certain high end models that can run in a Quiet Mode that doesn’t make that much noise at all and even may be run all the time if you need. You may even want to run the fan a bit after your staff has finished for the day in order to clear up any residual pollutants that may remain in the air.

If you are currently looking at the varius options of industrial extractor fans you have accessible, you will have to decide whether you would opt for a model that uses ducts or one that uses filters. The former selection is the most effective as it can take the polluted air straight out of your building and replace it with clean air. Your other option, the filtered models, do not do as well because they will recycle the same air within your building only they run it through a charcoal filter first to make it cleaner.

While a ducted model is preferred in most situations, they can be a bit more on the expensive side. Not to mention, perhaps you may not have the area necessary to install the ducts.
It is important that you find industrial extractor fans that have been created to last. That is why, try to find a model that is made from steel as this is a protracted metal that is sure to last. Also take a look for one that is coated in corrosion proof paint and has steel wire guards as well for appropriate protection.

It is also a good idea to pay special attention to the sort of motor every model features. Try to find one that is lightweight, but works well and is created to last.

One final thing you will have to take into consideration is how you will install your fan. You will find that most axial industrial extractor fans may be installed in different ways like:

• Mounted on the wall with peculiar brackets
• Placed freestanding in the center of the room
• Hung from the ceiling with chains
• Inline with your ductwork
Get more information and view all the types of industrial ceiling fans here.